Rabel 30

The entry level Cold hinged system for windows

Rabel 30

Rabel 30

The entry level Cold hinged system for windows

Rabel 30 is a very low cost camera European groove hinged system for buildings with low thermal performance requirements. Since it is based on a 35mm frame it is one of the narrowest hinged windows on the market, primarily used for windows. It is available in simple hinged typologies, tilt only, projecting and tilt and turn. As standard it comes with a Cremona handle in matching profile colours and a multiple point locking system.


To save on material cost as well as manufacturing time it was designed without a glazing bit via the use of a ‘U’ shape glass gasket, like in the case of sliders. Being able to take a glazing panel 24.5 mm wide, in small openings it can accommodate an internal air space of 16mm thus taking full advantage of the glass thermal performance.

Technical characteristics
Frame Height 56 mm
Sash Width 42 mm
Sash Height 62.5 mm
Type Hinged
Max. Weight per Sash 80 Kg
Max. Sash Width 0.8 m
Max. Sash Height 2.4 m
Glazing Width Possibilities 24 mm
Maximum Locking Points 9
Sealing Type 2 Gaskets

Performances
Fabrication Thermal Transmittance EN ISO 10077-2 (Uw) >=3.1 W/(m2K)
Frame Thermal Transmittance EN ISO 10077-2 (Uf) 7 W/(m2K)
Air Permeability EN 12207 Class 4
Water Tightness EN 12208 Class 7A
Resistance to Wind Load EN 12210 Class C5